WIRING HARNESS RING LUG CABLE. It is a ring lug cable that screw mounts onto a battery and provides an interface for plugging into a charger, dc socket, etc. Can be used for most maintenance battery chargers such as Battery Tender, Genius, Schumacher, Black & Decker and so on.
WIDELY USED. This is the best way to keep a battery charged on a Motorcycle, Boat, Cycle, Bike, Car, Tractor, Riding Mower, ATV, every vehicle outdoor equipment. For most battery Trickle Chargers that use the male female plug (SAE).
QUALITY WORKMANSHIP. Attached weatherproof dust cover protects 2-pin quick disconnect SAE terminals from raindrops and dusts. Easy to install and works like a charm! This makes it easy to share the minder.
Convenient for hard-to-access batteries. Whenever you need without having to unscrew bits and pieces of your bike, and the versatility of the system means you can either draw power from the battery or charge it.
2 FEET CORD ADAPTOR. Cable: SPT-2,16AWG/2C; Length: 2 feet; Color: Red/Black; With 10A fused for electrical protection; Fast and easy to connect and disconnect.
Size:2 Pack
Ring Terminal to SAE

Wire: SPT-2, 16AWG/2C
Color: Red/Black
Length: 2ft
Fuse: 10A
Terminal: 8.4*13.8 R Type, Brass
Package: 2pcs

[Multi Using] This is the best way to keep a battery charged on a Car, Motorcycle, Tractor, Riding Mower, every vehicle outdoor equipment.
Use to charge battery with an accessory connector (and a USB charger) to
recharge your devices, or run an air pump.

[A must-have for Outdoor Equipment]
These are a must for keeping your motorcycle batteries alive for any motorcyclist. These are a must-have for old carbureted motorcycles, sticking them on my modern bikes. It is worth having one of these on every battery in your garage.
There is
no need to lift the seat
but still trickle charge, as you can leave it attached and tucked it in under the seat.

Fast and easy to connect and disconnect
, you can to install on your battery for quick connection to the battery maintainer.