Made of quality anodized billet aluminum, these aftermarket bar end weights are designed to protect your bars and grips in the event of a crash
Laser etched on to the slider that is an engraved GSXR in white writing on the blue plating which adds a nice touch to the bars
Straightforward Install, Remove the stock ends and squeeze the new ones in place, secure them with a phillips screwdriver
Tips: Use long bolts with rubber bushings for 7/8″ handlebars with open ends or use short bolts only for M6 thread bar ends or use your stock bolts
Kindly Reminder: we’d recommend to use loctite on the bolts to keep the ends loose from vibration Package Include:
A pair of bar ends
M6 phillips bolts (1.77 inch bolts x2, 2.75 inch bolts x2)
Nuts x2
Rubber bushings x2
Fitment:
Bandit GSF600S 1996-1999
Burgman (AN400/AN400A) 2007-2016
DR-Z400S 2005-2019
DR-Z400SM 2005-2009
DR650SE 2001-2019
GS500E 1989-2000
GSX-R600 1992-2014
GSX-R750 1996-2014
GSX-R1000 2001-2014
GSX-R1100 1989-1998
GSX1100F 1988-1993
Hayabusa GSX1300R 1999-2011
Katana GSX600 1989-2008
Katana GSX750 1989-2008
SV650/SV650S 1999-2009
SV650A 2003-2009
SV650SF 2008-2009
SV1000 2003-2005
SV1000S 2003-2007
TL1000S 1997-2001
UH200A 2014-2019
See what customers have said:
1. If your bike has 7/8″ handlebars with open ends, these will work by inserting the bolt with the rubber stoppers into the handlebars, as you tighten the bolt it squeezes the rubber making it expand inside of the bars.
2. The bolts supplied were 6mm thread, had to replace them with my stock bolts for 8mm thread handlebar, not a big deal.
3. One thing I recommend though, is using some red loctite on the bolt otherwise, vibration will shake it loose.