Wide Suitability & Not For Sportster: The hard motorcycle saddlebags fit most motorcycles models such as Vstar Vulcan boulevard Softail with properly mounting hardware. However, they would not fit every models. For Sportster or Shadow owners, you are not suggested to order them because the space between shock and tail light is too small to install the saddlebags. Also, we do not suggest ordering them if your motorcycles have the same design like Sportster.
ABS Plastics: The product dimension is 15.74 (L) * 6.29 (W) * 12.20(H), the shell thickness is 0.2 inch. The products are made from high-quality ABS plastic, not recycle or used plastic. Due to the feature of ABS plastic, the saddlebag will have a little unavoidable wiggle on irregularity road. To solve it, we provide 8 rubber spacers to reduce the their negative effect as more as possible.
No Advance-drilled hole: We do not add any pre-drilled holes. And, you are able to install the saddlebags with brackets based on your individual demands. The installation is not identical but the basic steps are the same for every motorcycle. (Refer to the Installation Video)
Note: No installation instruction included. Package includes 1 Pair Saddlebags (Left & Right) + 2 Keys + 2 Latches. You should leave 1 inch clearance between bottom of saddlebag and the exhaust pipe. Please double confirm prior purchase. If there is any concern, feel free to contact us in advance. Product Information
Material: Made of durable ABS Plastic
Color: Painted in vivid black
Condition: Aftermarket 100% New & No recycle material
Package Include: 1 Pair Saddlebag + 2 Keys + Other mounting accessories needed (Note: Installation instruction is included. Installation video can be found on our detail page. Paper Installation and Video Installation, make sure that you understand how to mount clearly.)
Available Motorcycle Models: Fit for Sportster, Dyna, Vstar, Vulcan and shadow, etc. There is no particular year for motorcycle models.
They are universal hard saddlebags and will fit most bikes and cruisers with the proper mounting hardware. However, they don’t fit all motorcycles. Fitment models should be left enough room around the turn signal and side of the fender.
Like 2021 Low Rider, there are 2 mounting holes on the motorcycle bracket under the back seat and there is enough room to put the saddlebag bracket, so the customers are not required to drill extra holes and relocate the tail turn signal to mount the hard saddlebags.
Like 2021 Iron 883, there is 1 mounting hole on the motorcycle bracket under the back seat, so the customers need to drill an extra hole to mount the saddlebags. Or, the customer needs to check whether the tail turn signals can be removed or not, and use that hole as the mounting hole for the saddlebag bracket if the turn signal can be relocated.

Installation Steps & Tips:
1. Tools Preparation
Two mounting brackets & One small drill rob & One 0.56” hole saw & One handheld electric drill
2. Determine Mounting Location
You are required to measure 2 places – the distance between mounting holes on the motorcycle bracket which is under the back seat, second is the holes on the saddlebag mounting brackets. After measure the most suitable hole location based on the 2 places above, it can be marked on the saddlebag to assist in accurate drilling.
3. Small Drill Rob Go First, 0.56” Hole Saw Comes After
We strongly recommend that you drill small holes (use a small diameter drill, smaller than 7mm, the diameter of screws is about 7mm) on the centre of your marks first, then you could use a 0.56” hole saw to expand the holes. One big advantage of this is that some customers will use the hole saw directly to drill holes with great effort, which will easily break the saddlebags. What we recommend is to maximize the possibilities that you will not break the saddlebags.
4. Put Accessories in
Firstly, put the rubber spacers in the holes. Then, put the bearing bushes inside the spacers and insert the screws. After that, put the saddlebag brackets on and add the metal gaskets. At last, tighten the nuts.
5. Put the Whole Saddlebags on Your Motorcycle
After the installation steps above, we believe that you’ve done the most important part. You are just required to put the whole saddlebag with mounting brackets on your motorcycle. Loosen the bolts on your motorcycle brackets under the back seat and put the saddlebags on, and tighten the bolt again.

Read more